Manufacturers, importers and retailers of toys and leisure products in China and Asia must implement robust supply chain management to ensure the timely delivery of finished goods that meet stringent toy regulations and address consumer expectations for toy safety. The manufacturing process must strictly comply with quality control standards and certification requirements.

These toys and leisure products may include baby musical toys like dancing duck, plush Interactive toy figures, stuffed animals & teddy bears, learning & education toys, etc.

HJ Service provides inspection services for toys and leisure products at every stage: from supplier investigation, audit to in-process inspection, final inspection, and final delivery of toys including children & baby toys, leisure items, and electric toys.

 quality experts understand the customer’s requirements, ensure that on-site inspections are properly performed on-site, and finalize clear reports to explain and explain all details.

Throughout the quality control process, we will verify the appearance quality, specifications, functions, reliability of the toys.

During the inspections, the inspector should find various defects by inspecting the packaging, markings, labels, instruction manuals, accessories, barcodes, functions, and the appearance/appearance of the product.

During the inspection of toys and leisure products, we found some common major and minor defects, including but not limited to

• Sharp edges or sharp points on the surface
• Small parts easy to pull off
• Untrimmed thread
• Poor alignment
• Deformity
• Open seam
• The warning label is missing
• Foreign insect
• Mildew
• Dirty stain / Crack
• Glue mark
• Stitching issues
• Colour shade
• Malfunction
• Peeling paint

• A component of the item is detached

  
  

Quality issues and delivery failures impact directly on your supply chain efficiency, profit margins, and brand’s reputation. so buyers set up an effective quality control system to meet quality and safety standards, along with expectations of end-users.

HJ Service provides inspection services for toys and leisure products at every stage: from supplier investigation, audit to the quality control, and oversee the final delivery

HJ’s quality experts understand the customer’s requirements, ensure that on-site inspections are properly performed on-site, and finalize clear reports to explain and explain all details.

Throughout the quality control process, we will verify the appearance quality, specifications, functions, safety of your household appliances, and whether it meets the US, EU, and many other specific standards.

Our inspectors diligently search for various defects during the inspection process. They examine packaging, labeling, instruction manuals, accessories, barcodes, and the overall appearance of the product.

During the inspection of the toys and leisure products, some common major and minor defects will be found, including but not limited to broken, crack, deformed, glaze bubble, cover deviation, stains, scratches, missing accessories, sharp corners, incorrect barcodes, poor paint, and poor assembly, etc.

• Identify any issues in product size/specification to save cost and time
• Reduce defects/flaws in the product and maintain a good brand image of the product
• Save on possible rework and product recall costs

• Confirm that the products will not be damaged during packaging and loading

  
  

Before conducting inspections, AQI technical engineers need to understand your product characteristics to determine key risks. By combining our Inspection Checklist with your unique product specifications and quality requirements, each inspection can be customized including FULL INSPECTION

We will identify and classify defects based on your Acceptance Quality Limits (AQL), verify the quality of mass production, perform product function and reliability tests on-site, and assess your compliance with product specifications and sizes.

Assess the quality of your product materials and workmanship, using a number of quality control checks and tests, including:

1. Barcode Scanning Test

Test the scannability of the product’s barcode to ensure that scanning devices can accurately recognize and decode the barcode.

2. Stuffing Cleanliness Check for Plush Toys

Inspect the cleanliness of the stuffing material inside plush toys to ensure there is no dust, dirt, or any harmful substances present.

3. Pull Test on Seams and Small Parts

Apply pull force to seams and small parts of the product to ensure their sturdiness and safety, preventing them from detaching easily.

4. Adhesive and Rub Test

Conduct tests to evaluate the strength of adhesives and abrasion resistance on the product’s surface, ensuring integrity during use.

5. Function and Performance Check

Check if the various functions and performance of the product operate correctly, including any mechanical or electronic functions.

6. Metal Detection Test

Use a metal detector to check the product to ensure there are no metal fragments or contaminants.

7. Frequency Check for Electronic Toys

Measure the operating frequency of electronic toys to ensure it is within legal limits and complies with industry standards.

8. Stability Test

Test the stability of the product under various conditions to ensure it does not tip over or lose balance during use.

9. Assembly Check

Inspect the assembly process of the product to ensure all components are correctly assembled and meet quality standards.

10. Assortment Check on All Inspected Cartons

Ensure that the categories and quantities of products in all inspected cartons correspond with the order requirements.

11. Wobbling Test

Apply wobbling forces to the product to test its sturdiness and durability, particularly assessing any movable parts.

12. Colour Comparison Check

Compare samples with a standard color to ensure the product color meets design specifications.

13. Compulsory Marking Check

Inspect whether the product has mandatory markings that comply with legal regulations, such as warning labels and user instructions.

14. Carton Drop Test

Test the durability of the packaging carton during a drop situation to ensure it can protect the internal products from damage.

15. Smell Test

Check the product for any unpleasant odors to ensure that the materials used do not contain harmful chemicals.

16. Sharp Edge/Points Check

Inspect the product for any sharp edges or points to ensure that it will not cause harm to users during usage.

17. Flammability Testing

Conduct flammability testing to assess how materials react to flame exposure and ensure compliance with safety standards.

18. Humidity Test

Test the performance of the product under varying humidity conditions to ensure that it does not get damaged in damp environments.

Summary

Performance and reliability are critical to ensure consumer satisfaction. especially the toys for children.

However, some reliability tests cannot be performed at the inspection site. It requires a specific environment and test equipment to ensure compliance with applicable safety standards and regulatory requirements. HJService Inspectors can randomly take samples in production according to customer requirements and forward them to tested by an accredited laboratory.

Regulations around the world are strict for children‘s toys, and these products should be ensured to meet the standards and regulations of the destination market.

HJ Service’s partner laboratories offer a wide range of tests covering every aspect of product quality and safety:

Examples of toy testing in the laboratory

• ISO8124 Part 1 Safety of Toys, Mechanical Hazards
• ISO8124 Part 2 Safety of Toys, Flammability
• ISO8124 Part 3 Safety of Toys, Migration of Certain Elements
• IEC 62115 Electric Toys Safety
• IEC 60825 Laser/LED Safety
• EN 71, Part 1 Safety of Toys, Mechanical and Physical Tests
• EN 71, Part 2 Safety of Toys, Flammability Test
• EN 71, Part 3 Safety of Toys, Migration of Certain Elements
• EN 71, Part 8 Activity Toys for Domestic Use (swings, slides)
• EN 62115 Electric Toys Safety
• EC No. 1907/2006 (REACH), Total Cadmium
• EC No. 1907/2006 (REACH), Phthalates (non-mouth & mouth)